MODEL 460/467 UNCOMPRESSED DIGITAL STUDIO-TO-TRANSMITTER LINK (STL)
This Digital STL offers (6) uncompressed program channels in a single 500 kHz RF channel assignment. The transmitter and receiver feature a front panel RS-232 port to connect to a PC that will characterize the unit for frequency, type of modulation, input/output configuration; display operating parameters; and establish major and minor alarms. Sample rates of 48, 44.1, and 32 ks/s are all supported.   More Information - Click Here

SERIES 5200 ANALOG STUDIO-TRANSMITTER-LINK (STL)
The 5200 is an economical STL system that is well suited to a variety of applications, including composite, mono, dual mono, hot stand-by, redundant and multi-channel. It features an LCD and is fully frequency agile from the front panel.  More  Information - Click Here

MODEL 7700B/7707 STUDIO-TO-TRANSMITTER LINK (STL)
This Composite STL combines proven reliability with unsurpassed technical performance. The combination of the transmitter’s frequency stability and superior SNR ratio with the receiver’s low noise and high sensitivity offers users great versatility.  More Information - Click Here

MODEL 8300/8301B STUDIO-TO-TRANSMITTER LINK (STL)
The 8300/8301B Composite STL features a 10-14 Watt power output and exclusive 70 MHz IF Repeater circuitry. The IF interface between the 8300 transmitter and 8301B receiver eliminates the audio deterioration inherent in the demodulation and remodulation that occurs in conventional receiver/transmitter composite relay configurations.More Information - Click Here

MODEL 9100/9107 STUDIO-TO-TRANSMITTER LINK (STL)
The 9100/9107 is a frequency synthesized and agile Composite STL, available in all standard bands. The 9100/9107 is spectrum efficient and can achieve greater than 70 db SNR and 0.05% THD with only ±37.5 kHz deviation. An automatic switchover is built-in to the 9107 receiver.   More Information - Click Here

MODEL 9200/9205/9205N STUDIO-TO-TRANSMITTER LINK (STL)
The 9200/9205/9205N is an economical frequency synthesized and agile Monaural STL, available in all bands below 1 GHz. The 9200/9205/9205N is spectrum efficient and is available for 200 kHz (standard) and 100 kHz (narrow) RF channel spacing. More Information - Click Here

ACCESS RACKMOUNT

ACCESS delivers mono or stereo audio over POTS, DSL, Cable, Wi-Fi, 3G cellular, satellite — plus some services you may not have even heard of. Given the challenges of the public Internet, it’s no small boast to say that ACCESS will perform in real time over many available IP connections including challenging ones.
BRIC (Broadcast Reliable Internet Codec) technology allows ACCESS to achieve unprecedented flexibility and reliability in the IP environment.

ACCESS will work on a wide variety of wired and wireless data
circuits, including:
• Cable, DSL and POTS
• Wireless Network-802.11x (Wi-Fi) WiMax
• 3G Data Networks,1x EV-DO, UMTS
• Satellite terminals
• Public Internet—Uses Revolutionary BRIC Technology, designed to overcome the innate unreliability of the public Internet

ACCESS is also a full-featured POTS codec
• Use ACCESS to make a POTS-to-POTS connection. Dial up
a Comrex POTS codec (including Matrix, Vector or BlueBox).
• You can deliver 15 kHz Stereo on a single POTS line when
connecting to another ACCESS.

"Into Tomorrow with Dave Graveline"  

TSL 910 Specifications
Frequency Ranges: 940 to 960 MHz – 200 to 240 MHz – 300 to 330 MHz +other frequencies upon request
Output Impedance & Connector: 50 ohm type ‘N’ female
Harmonic Frequencies Level (ref. to carrier):  < -65 dB
Spurious Frequencies Level (ref. to carrier):  < -80 dB
Input Impedance:  600 ohms or greater
Input Level: -6 dBm to +10 dBm nominal for  +/-75 Khz deviation adj.
Mono Input ( with pre-emphasis): pre-emphasis 50/75us selectable
bandwidth 30Hz – 15 KHz , attenuation at 19 KHz 40 dB or greater
 Deviation from pre-emphasis curve +/- 0.4 dB
Stereo Input (flat):
 bandwidth 20Hz – 80KHz
Linearity (input at 500 Hz):
 dev: 20Hz – 40kHz < 0.2dB
 dev: 40kHz – 75kHz < 0.2dB
Distortion (THD):  dev: 75kHz < 0.04%
S/N Ratio (ref. to 50 kHz / 1000 Hz):
 mono > 80 dB
 stereo > 75 dB
SCA inputs:  3 inputs(1.5 V p-p)
Power Supply
 operating voltage 110/220 +/- 20% Vac
  50/60 Hz
 power consumption 50 / 70 VA
 battery powered (optional) 15Vdc, 2A
Operating Conditions
 cooling 15Vdc fan
 operating temperature -20 to +40C (-4 to +104 F)
 relative humidity 95% max.
Dimensions
 weight 10 Lbs / 4.5 kg
 width 19” / 483 mm
 height 1.74” / 44 mm
 depth 18” / 457 mm

RSL 900 Specifications
Frequency Ranges: 940 to 960 MHz  200 to 240 MHz – 300 to 330 MHz + other frequencies upon request
Input Impedance & Connector: 50 ohm type ‘N’ female
Audio Frequency Output: 0 dBm at 600 ohms +/- 6dB adj.
IF Output: 0dBm at 10.7MHz / 50 ohms
De-emphasis:  50 / 75us
Input Voltage Range: 10uV – 30mV rms
Image Rejection: >65dB
Spurious:  66dB
Lowest Threshold Squelch: 20uV
Distortion (THD): < 0.4% (typ 0.25)
Frequency Linearity (15Hz – 100 kHz): +/-0.4dB
Signal to Noise Ratio:  >75dB
Selectivity:  -40dB at ±500KHz
Sensitivity:  -62dBm for 60dB S/N
Power Supply: operating voltage 110/220 +/- 20% Vac 50/60 Hz
 power consumption 30 VA
 battery powered (optional) 15Vdc, 0.8A
Operating Conditions:
 cooling convection
 operating temperature -20 to +40 C (-4 to +104 F)
 relative humidity 95% max.
Dimensions:
 weight 10 Lbs / 4.5 kg
 width 19” / 483 mm
 height 1.74” / 44 mm
 depth 18” / 457 mm

Eagle PLUS