Critical Application Receivers
"Professional Series" Analog FM monitor/translator receiver"
Now with adjustable-threshold, "Carrier Sense"
Sensitive, reliable and capable of extreme service, the FT-1AP is the recommended monitor/ receiver for stations whose ratings are pegged as much to audio quality as content, or where there is a demonstrable need for accurate off-air sampling in real time. Referred to by many as approaching CD-quality audio reproduction, such a capability not only assists station in establishing audio excellence for your audience, it can also assist the CE in spotting equipment malfunction in the processing chain.
Since its introduction the FT1AP has been touted by some as "the ultimate translator receiver" for difficult translator/repeater work. Highly reliable in unmanned settings, the FT-1AP's solid rf sensitivity and selectivity can be expected to maintain your translator/repeater incoming reception at maximum efficiency .... this even under high rf saturation, narrow frequency offset or in a deep fringe location. This is a result of the FT-1AP's high level of rf sensitivity (30uv for 50dB quieting in stereo), and first and second adjacent rejection (25dB and 80dB respectively).
According to those using the FT-1AP as a monitor/receiver for remote broadcasting, the FT-1AP's remarkable sensitivity has often brought a fully listenable, station signal into venues where even car radios have failed. Such a capability has proven invaluable to both the remote engineer and on-air talent, providing incentive for the highest program quality.
Whether it is in the station rack, as a remote monitor, or as a remote demodulating receiver at a translator/repeater site, the FT-1AP's sturdiness, high rf performance capabilities and its ever-present CD-like audio clarity make it the receiver to beat. This is especially valuable when these characteristics are important to maintaining the radio station's support and its listener base through repeater/translator chains. Not only that, the FT-1AP has the elegance and functionality to be installed as a component in any high resolution, audiophile system. This allows station personnel the opportunity to monitor the station signal from the comfort of their own home.
The Fanfare FT-1AP is likely the most sensitive, professional monitor/receiver on the market today. Combine that with its excellent adjacent rejection capability and high-reliability circuit design and you have a receiver that can hack it, unattended, in just about any climate, rf or otherwise.
Key Benefits
- 'Upgradeable' software-controlled microprocessor monitors all functions.
- Balanced (0dB / 600ohms - +6dB) audio outputs.
- Two sets - unbalanced audio outputs,
- Adjustable Composite Output remains 'hot' at all times (unit 'on' or 'off').
- "Adjustable Carrier Sense".
- Control buttons may be recessed to guard against accidental activation.
- Fully modular contruction for easy servicing in the field.
- Full steel chassis for maximum rf shielding and durability.
- Noise reduction circuitry maintains ambient noise levels below usual minimums.
- Black, satin-finished, (2-RS) front panel with 19" EIA rack mtg.
"Broadcast FM Stereo / AM Stereo Tuner-Monitor-Translator"
Now With 9 or 10KHz AM Spacing For World Use!
Broadcast AM/FM Tuner/MonitorTranslator Receiver
In the
station rack, as a remote monitor, or as a remote demodulating receiver at a
translator/repeater site, the FTA-100P's 'bulletproof' sturdiness, its high rf performance
capabilities, and its "CD-like" audio clarity make it the AM / FM / AM-stereo
monitor to beat.
Complete
with state-of-the-art, AMAX* AM- AM-stereo, the Fanfare FTA-100P monitor/ demod is the
recommended receiver for both AM, and FM broadcasters. Not only that, it's ability to wear
both AM and FM hats makes it particularly cost effective as a back-up for difficult FM
translator/repeater work. Why, because the FTA-100, like its FM-only brother, the FT-1AP,
is highly reliable in unmanned settings.
|
Pricing
| Description | Price |
OPTIONS | Price |
|---|---|---|---|
| FT-1AP (T) Translator Series with Carrier Sense | $1995.00 | FT1A-IRRS IR Remote Control For FT-1A & FT100 Series | $195 |
| FT-1AP (M) Monitor Series Receiver Not legal for translators |
$1695.00 | FT1A-N-CONN Installs "N" connector for Antenna | $50 |
| FT-100P AMStereo /FM Stereo Translator Receiver | $1995.00 | FT1A-RS232 Installs Serial Data Port via 9 pin D-sub. | $150 |
| FT-100P AMStereo /FM Stereo Monitor Receiver Not legal for translators | $1895.00 | FT1A-CS-120 or FT1A-CS-05 IAdjustable Carrier Sensing with either 120 or 5 second duration. Both 5 step adjustable (0-50 dB.) | $150 |
Model 631 – Professional FM Receiver
|
|||
 |
|||
| DESCRIPTION: | |||
| Inovonics' Model 631 is our second generation of frequency-agile, digitally tuned receivers for FM translator and other critical off-air reception applications. Featuring menu-driven access of display and function selections, the 631 provides a switchable IF bandwidth to help solve difficult adjacent-signal problems and readouts of signal strength and multipath distortion to aid antenna alignment. Selectable options and alarms may be remotely controlled or monitored, and high-resolution bargraph readouts give accurate indications of incoming RF and MPX/stereo audio levels. |
RS80 AM/FM Rack Mount Radio Receiver
The Affordable Solution For EAS Or Monitor Applications
| RS80 Tuner The
new RS80 Quartz PLL Synthesized AM/FM Tuner is a single rack space signal source designed
for the install/contractor market. The unit is ideal for schools and business installs
where reliability and great sound are paramount. Programmable 9 - 10 kHz AM centers
switching allow the RS80 to be operated in the United States as well as Europe.
|
Pricing
| Description | Price | EBS Price |
|---|---|---|
| Inovonics Model 631 | $1490 | Call |
| Rolls RS80 | $350 | Call |
